1. Definitions

Terms defined in bold and capitalized have the meanings specified below:

General Conditions: document intended to regulate the online purchase of products in defined below.

Site: the set of web pages (excluding external links) accessible from the address: www.mgftools.de

Products or product: all goods sold by the website www.mgftools.de

Fact Sheet: the set of any web page, link or downloadable document containing information about the features, use, maintenance, disposal, etc. a Product

Documentation: set of electronic documents and / or paper (ex .: invoice, delivery note, packing list. Etc.) Issued by mgf tools through the carrier or sent by e-mail at the time of shipment

Consumer: a natural buyer of products for purposes not related to their professional activity.

Professional: the natural or legal person acquiring the products for purposes related to their professional activities.

Customer: Consumer or Professional, buyer of products according to the instructions on the Site and in the General Conditions.

Purchase Order: order by the customer that is perfected after the acceptance of the General Conditions of Sale.

Contract of Sale: sales contract between the customer and perfected mgf tools following the sending of the Purchase of the customer and the receipt by mgf tools. This agreement is conditional on the full payment of the amount specified in the Purchase Order and better specified in these Terms.

Shop Outlets: the / the point / the sale mgf tools indicated / s on the site www.mgftools.de

Seller: MGF Tools Deutschland S.r.l GmbH  - Via Chico M., 8- 43055 Mezzani (PR) registered in the Register of Companies at the Chamber of Commerce of Parma to n. PR 253481, fiscal code and VAT number IT02620710349 or even "mgf tools"

2. Acceptance of the General Conditions of Sale

Before concluding the Purchase Order, you represent that you have read and accepted fully the content of the General Conditions of Sale, the Privacy Policy, the information on the right of withdrawal and the information provided during the purchase process . The General Conditions of Sale form an integral part of any Purchase Order and Contract of Sale of Products sold on the Site of mgf tools into force on the date of the relevant Order.

To this sake, prior to purchase, will be specifically asked the customer to carefully read and expressly accept the General Conditions of Sale, the information on the right of withdrawal and the Privacy Policy.

These Conditions of Sale exclusively regulate the offer, transmission and acceptance of Purchase Orders for products on the site www.mgftools.de between the Customer and the Seller.

3. Terms of the Contract of Sale

3.1 The customer can buy any product, as described in the information sheet in the pages of this site. Please note that any image in the information sheet may differ from the product chosen for size, color, accessories and anything else specified in the text itself.

In order to make a Purchase Order is necessary that the customer is registered with the Site.

During the registration process you must fill out a form, including the information necessary for the management of the Purchase Order and the Customer.

The customer can confirm the order d 'Purchase the current commercial conditions specified on the Site.

3.2 The customer can choose the products based on the Data Sheet and first check the availability, delivery time, the grand total, including all costs of ancillary services and data, such as, for example, the shipping address, necessary to completion of the Purchase Agreement and the subsequent sale. Before confirming the Purchase Order, the Customer must ensure that all the above data are adequate to meet their needs.

3.3 In case of unavailability, even partial, of / the product / the indicated / s in the Purchase Order, mgf tools immediately communicate to the customer all the possible alternatives, while leaving the customer the choice of a partial order, its cancellation or order of an alternative product.

3.4 The Contract of Sale will be concluded with the receipt of the Purchase Order except as provided by art. 3.6. The communication of the confirmation of receipt will be by e-mail at the address indicated on the Site by you.

3.5 Conclusion of Contract mgf tools will pay the Purchase Order.

3.6 Mgf tools reserves the right not to confirm the Purchase Order, thus rendering ineffective the Contract of Sale. By way of example this may occur in the following cases:

  • inserting incorrect or false personal data of the Customer
  • previous default of the customer against mgf tools
  • ...

3.7 By sending electronic Order the customer unconditionally accepts the General Conditions of Sale.

If the customer does not accept some of the terms contained in these Terms and Conditions please do not forward the Purchase Order Product.

3.8 With the transmission of the Purchase Order the Customer confirms to know and accept the General Conditions of Sale and additional information contained in this section, including the General Conditions of Use, the Privacy Policy, the information on the right of withdrawal.

3.9 Conclusion of the Contract the Seller will transmit to the customer a receipt of the Purchase Order containing the General Conditions of Sale.

4. Payment of the Products and refund

4.1 The Customer will have to make the payment of the total price indicated in the Purchase Order, according to the time and manner chosen in the Purchase Order.

If payment of the total price is not made within the time expressly indicated in the Purchase Order or as a result of checks is inconsistent with what is indicated in the Purchase Order, the Contract of Sale is automatically terminated.

4.2 The methods of payment accepted are:

Wire Transfer

The bank transfer must be made as follows:

Reason: "Balance of Purchase Order [Number Purchase Order] by [Customer Name]" where [Number Purchase Order] and [Customer Name] are the same as indicated in the order confirmation sent by mgf tools .

The Bank Draft should be made in favor of MC Group Srl the extremes indicated in the Order Confirmation within 2 days of submission of the Order itself.

At any time after 5 days from the date of acceptance of the Order without having received the credit of the banking, mgf tools will cancel the Order.

The shipment of the Products will only be after the accreditation of the entire amount stated in the Contract of Sale.

Credit Cards

If paying by credit card, the customer will be redirected on secure servers bank Unicredit Spa and the issuing bank to authenticate the transaction.

Mgf tools accepts the following credit cards, including prepaid and rechargeable: Visa, Mastercard, Maestro. Pe greater protection, if the card's customer uses the technology 3D Secure, Mgf tools accept the transaction only after entering the security code.

With payment by credit card will not be charged any fees.

The data of the credit card entered is handled exclusively by Unicredit Spa in maximum security. Initially prompted the bank only authorize spending on the credit card. The charge on your credit card the customer will be at the time of shipment of the products.

In case of any irregularities in the credit card used communicated by Unicredit Spa, mgf tools cancel the order immediately notifying the Customer via e-mail.

PayPal

The Customer may pay directly from the page of the PayPal site through the procedures indicated. The charge on the PayPal account will be at the time of shipment.

PayPal guarantees the quality of the purchase reimbursing all the product price, including shipping costs, when you do not receive the tool you bought or if the tool does not conform to the specifications listed on mgf tools .

For more information please see the information pages on your PayPal account

5. Product Delivery Time and Terms

5.1. Mgf tools delivers to the Customer, via courier, Products confirmed in the Purchase Order. Mgf tools can not in any way be held responsible for acts or inefficiencies attributable to the carrier.

5.2 In addition to the standard delivery, can be selected when ordering additional services (for example: fast delivery, delivery on appointment, insurance ...). Availability and costs of such services are clearly indicated on the Site prior to confirmation of the Purchase Order.

5.3 Unless otherwise specified the delivery of the Products is conducted "roadside", near the Civic specified by the customer, or, if the civic indicated was in pedestrian zones delivery will be at the closest point accessible by vehicle courier.

5.4 If the courier charge from Mgf tools were to find it impossible to deliver the product to the conditions and costs agreed due to lack of information from the Client, mgf tools reserves the right to charge the customer the cost of the non-delivery and storage Product.

5.5 In cases where it could not be confirmed in the form of transport chosen, mgf tools  immediately contact the customer to verify the possible alternatives, including the option to cancel the order at no additional cost and with the refund of the amount already paid.

5.6 Delivery of the products will be selected at the Purchase Order. The Customer undertakes to verify, for each Purchase Order, that information relating to the delivery addresses are correct.

5.7 Delivery of products is subject to payment by the customer, the sum indicated in the Purchase Order.

Conditions and terms of delivery other than those provided in the Contract of Sale must be agreed between the customer and mgf tools and accepted in writing.

5.8 E 'can check the delivery status through the "tracking" via a link or a call center notified via e-mail at the time of shipment. If not specified, you can ask about the shipping address [email protected], indicating in the subject the order number.

5.9 Upon delivery of the Products the Customer is required to check that the goods delivered corresponds to the Documentation in particular that:

the number of packages delivered is the same as shown on the Documentation

the packaging of the products is intact, undamaged, free of stains and tape to seal mgf tools shipment intact

that the protective film white or black proves perfect

5:10 If in doubt about the integrity of packages the customer can refuse delivery or accept it with subject to control GOODS, adding the signature on the transport document marked "acceptable subject to control ..." and the reason (eg. acceptable subject for wet neck for neck crushed, etc.).

Except as required by law, once signed the document transport the Courier, the Customer may not make any objection about the amount and integrity of what was received.

In the case of non-compliance or damage, the customer is required to inform mgf tools within 24 hours from the withdrawal or rejection of the goods in question at [email protected] indicating the order number and describing the incident.

5:11 In cases where it could not be confirmed in the form of transport chosen, mgf tools immediately contact the customer to verify the possible alternatives, including the option to cancel the order at no additional cost and with the refund of any already paid.

6. Warranty

6.1 Legal guarantee of the Consumer: Pursuant to the effects of artt.128 and ss. of Decree 206/2005 ("Consumer Code") as amended on all products purchased by the Consumer mgf tools exists a legal guarantee of 24 months.

In particular, the Seller is liable to the consumer for any lack of conformity which exists at the time of delivery.

The non-compliance exists between each other when:

The tool is not intended to serve as a must habitually, as indicated in the catalog and / or manual produttore2. the tool does not conform to the description or does not possess the qualities promised by mgf tools.

6.2 E 'duty of the Consumer report the non-compliance, which appears within 24 months from the date of delivery, within 2 months following the discovery of the defect of the product.

In case of non-compliance, the Consumer may ask mgf tools , choice and free of charge, from the following options:

repair or replacement of the Product;

a reduction of the purchase price;

the termination of the Contract of Sale;.

Mgf tools will do everything possible to meet the demand of the consumer, including sending the product to the Service Centers authorized by the manufacturer, unless the request is not objectively impossible to satisfy or proves to mgf tools prohibitively expensive under the "Code of consumption ", Article 130, paragraph 4.

To exercise the legal guarantee is required to report to the e-mail [email protected]:

reference of purchase, date and order number

reason for non-compliance.

enclosing all the relevant material, such as pictures, documents ...

6.3 If the purchase was made by the subject that he does not hold the title of Consumer, refer to the provisions laid down in art. 1490 et seq. cc

7. Prices

7.1 All sales prices of the products listed on the site are in Euro and include VAT and all other taxes of the law, including the ECO-contributions.

Transaction costs, such as preparation, delivery, customization, ... etc ..., if any, are indicated and calculated in the purchase process and clearly specified under Purchase Order.

7.2 The prices of products listed on the site may contain omissions www.mgftools.de be subject to change and therefore asks the customers to check the final price of sale before sending the relevant Purchase Order.

7.3. In the event of changes to the price higher, mgf tools undertakes to inform the customer, who has the right to cancel the order, without any cost at charge.

8. Liability

Mgf tools not responsible for disruptions caused by force majeure or unforeseeable circumstances, as well as employees of a malfunction or disruption of the Internet, in the event that fails to execute the order within the time stipulated in the contract.

The Information Card Products contained in the Site is not only indicative of a contractual nature.

Can not be attributed to mgf tools responsibility in case of unavailability of one or more products. Mgf tools will work anyway to propose to the Customer any alternative products or alternative amount.

Mgf tools will not be liable for late, damages, losses and costs incurred by the customer as a result of failure to perform the Contract of Sale for reasons not attributable to him, having the customer shall only be entitled to a refund of the price paid and any additional charges incurred.

9. Right of Withdrawal

9.1 The consumer has the right to terminate the Contract of Sale, without any penalty and without specifying the reason, within 14 days from the day of receipt of the Product.

9.2 If the consumer decides to exercise the right of withdrawal, the procedure is as follows:

The Consumer access to the private area, select "order history" and select the order corresponding to the tool that wants to return;

If the product has been delivered in less than 14 days, you can select it with a simple click and submit your request for a refund;

If deemed appropriate, in an 'optical enhancement, you can specify why it was decided to return the Product;

9.3 mgf tools shall proceed to make the necessary checks and, within the next working day, will send the Product Return Authorization (RMA).

Without the RMA by mgf tools , the customer is not authorized to proceed with the shipment or the return of products, which therefore will not be withdrawn from our warehouses / stores.

The return of the product must take place no later than 14 days from the receipt of the RMA. The Consumer may return, at its discretion: via shipping or by hand delivery to one of the outlets mgf to0ls chosen during compilation of the declaration of withdrawal.

9.4 The consumer is obliged to use a method of delivery and packaging adapted to the types of product, in order to return to the Product mgf tools intact in all its parts. In any case, to be entitled to a refund of the amount paid, the consumer has the duty to return the product intact, in normal condition, packed in its original packaging and complete with all accessories, instruction manuals and everything provided initially. In the case of shipping, the consumer must affix, outside the packaging, the module return authorization of the product (RMA), in order to make possible the identification of the neck and its contents.

9.5 The costs of returning the product are charged to the consumer.

9.6 In the event of exercise of the right of withdrawal, mgf tools will check for returned Products and refund within 14 days of receipt of the products authorized or, in the case of non-receipt, as long as the consumer will prove to have them returned by the deadline.

9.7 mgf tools reimburse only the products returned intact in the original packing and in normal condition and will not be required to reimburse the additional costs such as, but not limited to, preparation costs, service costs extra customization costs or costs of transport.

10. Storage Mode contract

Pursuant to the Decree Law 70/2003, article 12, mgf tools inform the customer that any order sent will be stored in digital form on servers mgf tools criteria of confidentiality and security.

11. Communications and Complaints

The written directly to mgf tools and any complaint will be considered valid only if sent to the e-mail: [email protected]

Mgf tools respond using the telephone number, email address or mailing address specified by the customer during the registration and / or purchase, unless otherwise requested by the customer.

12. Governing Law and Jurisdiction

12.1 The General Conditions of Sale are governed by Italian law and in particular by the Civil Code and, where applicable, by DL 206/2005 and D. L. 70/2003.

12.2 Subject to the provisions of the Decree Law 206/2005, for any dispute arising between the parties the competent court is the Court of Parma.